How to Use Cork Tape: 1. First, clean the roller surface that needs to be coated with cork belt with absolute alcohol, and ensure that the roller surface is smooth and oil-free. 2. Sleeve a shaft on the center paper tube of the whole roll of cork tape to release the whole roll of anti-tape. 3. After accurately measuring the circumference of the roller to be covered, cut the cork belt to a bevel angle, and the length of the bevel angle is equal to the circumference. 4. Gently uncover the self-adhesive, align the corner of the cork tape with the edge of the roller and paste it. While rotating the roller, remove the self-adhesive on the cork tape, and spirally paste the cork tape to the roller. When pasting, the cork tape should be straightened evenly, and there should be no gaps or overlaps at the joints. 5. After sticking it all the way to the end of the roller, cut off the excess cork tape and trim the edge to be as aligned with the edge of the roller.