1. Cork belt product introduction In slitting and laminating, because the slitting machine and laminating machine are running at high speed, the substrate is easy to slide relative to the Godet, causing the surface of the film to be scratched or scratched by burrs on the Godet. This cork belt product wrapped around the surface of the Godet can effectively prevent the relative sliding between the film and the Godet, prevent the surface of the substrate from being scratched, scratched and slipped during operation, and comprehensively improve the quality of your equipment and products. 2. Cork belt product characteristics It is mixed and pressed by rubber and cork, so it can produce a good anti-slip effect. Because its surface appearance looks like sesame seeds, it is commonly known as sesame tape. This product has a certain thickness and is durable. Prevent the wire drawing phenomenon during the operation of film materials and reduce the generation of static electricity in materials. In order to prevent Godet from slipping, the traditional method is to coat rubber in Godet. This method requires professional manufacturers to import from Godet It is inconvenient to complete this work. The reverse side of this product is coated with a special pressure-sensitive adhesive, which can It is directly wound on the Godet and firmly adhered to the Godet of the equipment, which is easy to operate and reduces the cost. This product can firmly stick to the surface of the Godet, making the Godet not easy to slide, and can be maintained during the production process Uniformity of machine tension.