1 Loop-forming part: two inserted needle tongue needle beds, two loop-removing plates, two swing (openable) sinker beds, five yarn guide bars (four ground combs, one wool yarn comb), The ground comb is equipped with a ground comb guide needle block, and the ground comb divides the yarn block; The wool yarn comb is equipped with a wool yarn comb needle block and a wool yarn separation needle block; The sinker bed is equipped with a sinker block, two anti-closing steel wires, and the opening of the detachment plate is 16-60mm (10-30mm) 2 Warp axle brackets: five sets of warp axle brackets placed at the disk head position, and five warp axles with a diameter of 152mm. 3 let-off mechanism; Two rollers active let-off mechanism, change the amount of let-off by changing gear, five sets of let-off boxes, all driven by tooth belts. (Electronic let-off can be used) Fabric pull-take-up mechanism Multiple sets of pull-take-up rollers, drive discrete take-up device with pull-take-up box (electronic take-up can be used), the maximum take-up diameter is 1270mm 4 Electrical devices: three boxes of AC power supply, variable frequency stepless speed regulation, voltage 380V, frequency 50Hz, main motor 5.5 KW, coiler motor 1.1 KW (frequency converter is Mitsubishi, Japan), push button switch adopts Schneider electrical components.